Heat shrinkable cable end cap

Heat shrinkable cable end cap 1.With adhesive in the inner wall 2.Operating temperature: -55C~110C 3. Easily to fit into

 Heat shrinkable cable end cap

Features/Applications                          

KHEC offers an economical means of sealing the end of power cable with a completely watertight seal. The internal surface of the end cap has a layer of spiral coated hot melt adhesive, which retains its flexible properties after recovery. EC is recommended for application both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Product Dimension (standard length end cap)

Effectively offering protection against oxidation, Ozone, UV-radiation etc.

Coated with hot melt adhesive to ensure environment seal

Easily to fit into the cable end

 Minimum fully shrink temperature: 120

Property	Test Method	Typical Data
Operating temperature	IEC 216	-55 to +110
Tensile strength	ASTM D 638	>14MPa
Elongation at break	ASTM D 638	>400%
Density	ASTM D 792	1.05
Elongation at break after aging	150 /168hrs.	>300%
Dielectric strength	IEC 243	>15kV/mm
Volume resistance	IEC 93	>1014 Ω. cm

 

 

 

 

 

 

 

  

                          

EC-12/4		12	4.0	15	40	2.6	4 -10
EC-14/5		14	5.0	18	45	2.2	5 -12
EC-20/6		20	6.0	25	55	2.8	6 -16
EC-25/8.5		25	8.5	30	68	2.8	10 - 20
EC-35/16		35	16.0	35	83	3.3	17 -30
EC-40/15		40	15.0	40	83	3.3	18- 32
EC-55/26		55	26.0	50	103	3.5	28 48
EC-75/36		75	36.0	55	120	4.0	45 -68
EC-100/52		100	52.0	70	140	4.0	55 -90
EC-120/60		120	60.0	70	150	4.0	65-110
	EC-145/60	145	60.0	70	150	4.0	70-130
	EC-160/82	160	82.0	70	150	4.0	90-150
	EC-200/90	200	90.0	70	160	4.2	100-180

           

End cap with valve is available on request.

Heat shrinkable cable end cap